S. No. | Title of the paper | Name of the Journal with volume, page nos., year | Name of the authors | Impact Factor |
---|---|---|---|---|
1 | Performance Characteristics of Centrifugal Slurry Pump with Multi-Sized Particulate Bottom and Fly Ash Mixtures | Particulate Science and Technology, Taylor and Francis, 32, July 2014, pp 466-476 | Kumar S., Gandhi B. K., and Mohapatra, S. K. | 0.44 |
2 | Command shaped closed-loop control of flexible robotic manipulators | Journal of Vibration Engineering and Technologies, JVETv4n2-3 (Accepted Paper) | Ashish Singla, Ashish Tewari and Bhaskar Dasgupta | 0.328 |
3 | Effect of Processing Methods and Die Design Parameters on Green Properties of WC–Co Nanopowder Pellets | Materials and Manufacturing Processes, 30(11), pp. 1329–1341, 2015. | Devender Kumar, K. Singh | 1.629 |
4 | Creep analysis of a variable thickness rotating FGM disc using Tresca criterion | Defence Science Journal
Vol. 65, No. 2, pp 163-70 (2015) |
Kishore Khanna, V.K.Gupta and
S.P.Nigam |
0.292 |
5 | A Non-Contact Technique
for Damage Monitoring in Submerged Plates Using Guided Waves |
Journal of
Testing and Evaluation VOL. 43 / NO. 4 / JULY 2015 pp. 776–791, doi:10.1520/JTE20120357. ISSN 0090-3973 |
Sandeep Sharma1 and Abhijit Mukherjee2 | 0.39 |
6 | Experimental Investigation and Optimization of Process Parameters of Al/Sic MMCs Finished by Abrasive Flow Machining | Materials and manufacturing processes, Taylor and Francis publishers, 27:449-456,2015 DOI10.1080/10426914.2015.1004704 (SCI Expanded) | Sushil Mittal
Vinod Kumar Harmesh Kumar |
1.48 |
7 | Development of Automatic GMAW Setup for Process Improvements: Experimental and Modeling Approach | Materials and Manufacturing Processes, Taylor and Francis, Vol. 29, No. 8, pp. 988–995, 2014. | Bhattacharya A., and Bera T. K. | 1.629 |
8 | Influence of Heat Input in Automatic GMAW: Penetration Prediction and Microstructural Observation | Materials and Manufacturing Processes, Taylor and Francis, Vol. 29, No. 10, pp. 1210–1218, 2014. | Bhattacharya A., Bera T. K. and Suri V.K. | 1.629 |
9 | On Cutter Deflection Profile Errors in End Milling: Modeling and Experimental Validation | Materials and Manufacturing Processes, Taylor and Francis, Vol. 30, No. 8, pp. 1042–1050, 2015. | Bhattacharya A., Bera T. K. and Thakur A. | 1.629 |
10 | Influence of current and shielding gas in TiO2flux activated TIG welding | Materials and Manufacturing Processes, Taylor and Francis, Vol. 30, No. 9, pp. 1115–1123, 2015. | Tathgir S., Bhattacharya A., and Bera T. K. | 1.629 |
11 | Mechanical and Metallurgical Studies in Double Shielded GMAW of Dissimilar Stainless Steels | Materials and Manufacturing Processes, Taylor and Francis, Vol. 30, No. 9, pp. 1146–1153, 2015. | Kumar R., Bhattacharya A., and Bera T. K. | 1.629 |
12 | Toughness and Metallurgical Study of Austenitic Stainless Steel AISI 316 with Automatic GMAW | Journal of Materials: Design and Applications, IMechE (doi:10.1177/1464420715586823). | Bhattacharya A., Bera T. K. and Suri V.K. | 0.672 |
13 | On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment | Materials and Manufacturing Processes, Taylor and Francis, Accepted: 17June 2015, DOI: 10.1080/10426914.2015.1070425 | Ashu Garg, Anirban Bhattacharya, Ajay Batish | 1.629 |
14 | Dissimilar joining between austenitic and duplex stainless steel in double shielded GMAW: a comparative study | Materials and Manufacturing Processes, Taylor and Francis, Accepted: 8 June 2015, DOI: 10.1080/10426914.2015.1070414 | Anirban Bhattacharya, Ramesh Kumar | 1.629 |
15 | Revisiting arc, metal flow behavior in flux activated tungsten inert gas welding | Materials and Manufacturing Processes, Taylor and Francis, Accepted: 8 June 2015, DOI: 10.1080/10426914.2015.1070421 | Anirban Bhattacharya | 1.629 |
16 | Experimental Investigation of Magnetic Field Assisted Powder Mixed Electric Discharge Machining | Particulate Science and Technology (Taylor and Francis) Volume 33, Issue 3, 2015, Pages 246-256. | Geeta Bhatt, Ajay Batish, Anirban Bhattacharya | 0.482 |
17 | Powder Mixed Dielectric: An Approach for Improved Process Performance in EDM | Particulate Science and Technology (Taylor and Francis) Volume 33, Issue 2, 2015, Pages 246-256. | Ajay Batish, Anirban Bhattacharya and Naveen Kumar | 0.482 |
18 | Comparative study for surface topography of bone drilling using conventional drilling and loose abrasive machining | Proc IMechE Part H: J Engineering in Medicine, Vol. 229(3) 225–231, 2015 | Gurmeet Singh, Vivek Jain and Dheeraj Gupta | 1.329
|
19 | Microwave Processing Of Materials and Applications in Manufacturing Industries: A Review. | Journal of Materials and Manufacturing Processes, 30:1, 1-29, 2014. | Singh, S., Gupta, D., Jain, V., Sharma, AK. | 1.8 |
20 | Recent Applications of Microwaves in Material Joining and Surface Coatings | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2015, doi:10.1177/0954405414560778 | Singh, S., Gupta, D., Jain, V. | 0.661 |
21 | Microwave Cladding: “A New Approach in Surface Engineering | Journal of Manufacturing Processes, 16 (2014) 176–182 | Dheeraj Gupta, A.K. Sharma | 1.885 (SNIP) |
22 | Numeric Implementation of Drop and Tilt Method of 5-Axis Tool Positioning for Machining of STL surfaces | International Journal of Advanced Manufacturing Technology, Springer-Verlag London, Vol. 78, pp.1677–1690, 2015 DOI: 10.1007/s00170-014-6636-3 | Ravinder Kumar Duvedi, Sanjeev Bedi, Ajay Batish and Stephan Mann | 1.458 |
23 | The Edge-Torus Tangency Problem in Multipoint Machining of Triangulated Surface Models | International Journal of Advanced Manufacturing Technology, Springer-Verlag London, Published online 18th July, 2015, DOI 10.1007/s00170-015-7532-1 | Ravinder Kumar Duvedi, Sanjeev Bedi, Ajay Batish and Stephan Mann | 1.458 |
24 | “Modal analysis of Human Body Vibration Model for Indian Subjects under sitting posture” | Ergonomics (Taylor and Francis) published online 17 October, 2014 DOI: 10.1080/00140139.2014.961567 | Ishbir Singh, S.P. Nigam & V.H. Saran | 1.608 |
25 | Modelling fluidized dense-phase pneumatic conveying of fly ash | Powder Technology, 270: 39-45 | Setia, G., Mallick, S.S. | 2.449 |
26 | Modelling Minimum Transport Boundary for Fluidized Dense-Phase Pneumatic Conveying Systems | Powder Technology, 277: 244–251 | Setia, G., Mallick, S.S., Pan, R.,Wypych, P.W. | 2.449 |
27 | An Investigation into Pressure Fluctuations for Fluidized Dense-Phase Pneumatic Transport of Fine powders | Powder Technology, 277: 163-170 | Mittal, A., Mallick, S.S., Wypych, P.W. | 2.449 |
28 | Phase-dependent thermophysical properties of α-and γ-Al2O3 in aqueous suspension | Journal of Industrial and Engineering Chemistry, in press | Pal, Bhupinder, Mallick, S.S., Pal, B. | 2.011 |
29 | An Investigation into energy loss in bends for pneumatic conveying of fly ash | Particuology, in press | Tripathi, N., Sharma, A., Mallick, S.S., Wypych, P.W. | 2.058 |
30 | An investigation into pressure fluctuations and improved modelling of solids friction for dense phase pneumatic conveying of powders | Particulate Science and Technology, 33: 67-75 | Mittal, A., Setia, G., Mallick, S.S., Wypych, P.W. | 0.596 |
31 | Anisotropic CuO nanostructures of different size and shape exhibit thermal conductivity superior than typical bulk powder | Colloids and Surfaces A: Physicochemical and Engineering Aspects, 459: 282-289 | Pal, Bhupinder, Mallick, S.S., Pal, B | 2.494 |
32 | Shape dependent thermal conductivity of TiO2-deionized water and ethylene glycol dispersion | Journal of Nanoscience and Nanotechnology, 14: 1-7 | Pal, Bhupinder, Mallick, S.S., Pal, B. | 1.339 |
33 | Investigation into pressure fluctuations for dense-phase pneumatic conveying of powders | Particuology, 16: 187-195 | Mittal, M, Mallick, S.S, Wypych P. | 2.058 |
34 | Effect of Isothermal Annealing on Microstructural Morphology of Martensite in a Super Martensitic Stainless Steel Subjected to Different Prior Conditions | Materials and Manufacturing Processes (DOI: 10.1080/10426914.2014.965830) | Tarun Nanda, B. Ravi Kumar & Jasdeep | 1.629 |
35 | Performance Analysis of Ball End Magnetorheological Finishing Process with MR Polishing Fluid | Materials and Manufacturing Processes (Taylor & Francis), 30:12, 1482-1489, 2015 | Anant Kumar Singh, Sunil Jha, P.M. Pandey | 1.629 |
36 | A digraph permanent approach to evaluation and analysis of integtated water shed management system | Journal of Hydrology, vol. 525, pp. 188-196 | Dwarikanath Ratha, Dr. V.P. Aggarwal | 2.69 |