Conference Papers (2011-12)

 List of Conference Papers (2011-12)

S. No. Title of the paper Name of conference with venue, date and year, page nos. Name of the authors
1.      A comparative analysis on the performance and emission characteristics using raw hemp oil and filtered neem oil in Diesel engine FTME-2010, GNE Ludhiana, 1, 70-74, 2010 Mohapatra, S.K., Ragit, S,C., Kundu, K., Dahake V    
2.         Experimental investigations of performance and emission of hemp biodiesel and its blend with diesel FTIME-2010, GITM Yamunanagar, 1, 235-241, 2010   Mohapatra, S.K., Ragit, S,C., Kundu, K., Dahake V
3.         Optimisation of Mahua biodiesel by different production technique Advances in Chemical Engineering, Thapar Institute of Engineering & Technology, 1, 166-171, 2011 Mohapatra, S.K., Ragit, S,C., Kundu, K., Dahake V
4.         Performance and emission characteristics of a Diesel engine fuelled with hemp oil and 20% blends of hemp oil with diesel Emerging Trends in Mechanical Engineering, G. H. Patel College of Engineering and Technology, Gujarat, 1, 25-31, 2011 Mohapatra, S.K., Ragit, S,C., Kundu, K., Dahake V
5.         Combustion of agri-waste in fluidized bed boilers ICTME-2011, TIET, 1, 42-51, 2011 S. K. Mohapatra
6.         Various tool designs in friction stir welding International Conference on Emerging Trends in Mechanical Engineering 2011, Thapar Institute of Engineering & Technology, Patiala, 382-388 Pritika Pathak, Rahul Chhibber, S.K. Mohapatra
7.         Experimental study and numerical simulation on thermal analysis of tool and cutter grinding operation using FEM ICTME-2011, TIET, 1, 572-581, 2011   Mohapatra S.K., Dhull, V., Singla V.K.  
8.         Biodiesel production from used frying oil and properties as an alternate fuel ICTME-2011, TIET, 1, 768-772, 2011   Mohapatra, S.K., Ragit, S,C., Kundu, K., Dahake V
9.         Performance and emission evaluation of a CI engine fuelled with neem methyl ester and its blends ICTME-2011, TIET, 1, 773-781, 2011 Mohapatra, S.K., Ragit, S,C., Kundu
10.      Effect of parameters on predicted stresses during Single Point Incremental Forming International Conference on Emerging Trends in Mechanical Engineering (ICETME-2011), Mechanical Engineering Department, Thapar Institute of Engineering & Technology Patiala – 147004, Punjab 24 – 26 February, 2011 pp. 448 – 456 Anirban Bhattacharya, Ajay Batish
11.      Multi-response optimization using Grey analysis for nozzle effectiveness in a cylindrical grinding process International Conference on Emerging Trends in Mechanical Engineering (ICETME-2011), Mechanical Engineering Department, Thapar Institute of Engineering & Technology Patiala – 147004, Punjab 24 – 26 February, 2011 pp. 563 – 571 Anirban Bhattacharya, Ajay Batish, Mandeep Singh
12.      CFMEA: Concurrent Failure Mode and Effect Analysis Proceedings of 2nd International Conference on Reliability, Safety, and Hazard-Risk-Based Technologies and Physics of Failure Methods, December 14-16, 2010, Mumbai pp. 399-405 Upadhyay, N., Deshpande, B. M., and Agrawal, V.P.
13.      A decision making method for selection of finished process for a cylindrical surface Proceedings of 2010 IEEE International conference on Industrial Engineering and Engineering Management (IEEM 2010), Taipa, Macao SAR, P.R. China,7th-10th Dec., pp. 38-42. Varinder Singh, V.P. Agrawal, and P. Deb
14.      An improved graph theoretic model for integrated manufacturing system Proceedings of the Golden Jubilee National Conference on “Recent Advances in Manufacturing( RAM-2010), 19-21 July 2010, SVNIT, Surat, Gujrat, pp.151-156 Varinder Singh, V.P. Agrawal, and P. Deb
15.      Fuzzy scale based TOPSIS-MADM method for selection of finishing processes Proceedings of the Golden Jubilee National conference on “Recent Advances in Manufacturing(RAM-2010), 19-21 July 2010, SVNIT, Surat, Gujrat, pp.151-156 Varinder Singh, V.P. Agrawal, and P. Deb
16.      Optimization of Regenerative gas turbine cycle using adaptive neuro fuzzy inference system International Conference on Emerging Trends in Mechanical Engineering (ICETME-2011), Mechanical Engineering Department, Thapar Institute of Engineering & Technology Patiala – 147004, Punjab 24 – 26 February, 2011 Sumit Sharma
17.      Study of machining characteristics of different materials using abrasive flow machining process: a review National conference on Advances in manufacturing engineering, UIET, Chandigarh, , 20th - 21st May 2011, pp.230-235 Harmesh kansal Sushil mittal Vinod kumar
18.      A study on applications                  of non-traditional machining processes-a review National conference on Advances in manufacturing engineering, UIET, Chandigarh, , 20th - 21st May 2011,  pp 236-240 C.S.Kalra Vinod kumar  
19.      A review on effect of   WEDM performance, recast layer and wire accuracy National conference on Advances in manufacturing engineering, UIET, Chandigarh, , 20th - 21st May 2011,  pp 408-414 Anish kumar Vinod kumar Jatinder kumar  
20.      Effect of Machining                           Parameters on MRR during CNC WEDM of Pure Titanium 5th International Conference on Advances in Mechanical Engineering (ICAME-2011),S.V. National Institute of Technology, Surat Gujarat, India,pp 541-545, June 6-8, 2011. Anish kumar Vinod kumar Jatinder kumar
21.      Ultrasonic investigations of embedded and submerged components International Conference on Theoretical and applied computational and experimental Mechanics ICTACEM 2010, IIT Khargarpur, December 26th-27th, 2010 Sandeep Sharma Shruti Sharma Dr. Abhijit Mukherjee
22.      Health Monitoring of Post tensioning tendons using ultrasonic guided waves First Middle East Conference on Smart Monitoring and Assessment & Rehabilitation of Civil Structures (SMAR) 2011, American University in Dubai, (AUD) & IISHM, February 9th-11th  2011 Sandeep Sharma Shruti Sharma
23.      Mechanisms for producing ultra-fine/ nano grained microstructure for austenitic stainless steels International Conference on Emerging Trends in Mechanical Engineering (ICETME 2011), Mechanical Engineering Department, Thapar Institute of Engineering & Technology, Patiala, 2011 Pankaj Sharma; Mrudul Rai; Tarun Nanda
24.      An Analytical Finite Element Technique for Predicting Thrust Force and Torque in Drilling Process. International Conference on Emerging Trends in Mechanical Engineering, Thapar Institute of Engineering & Technology, Patiala, Punjab, India. Feb., 24-26th, 2011, pp. 199-210 J. S. Saini, Ashish Mittal.  
25.      Design of ash transportation system International Conference on Emerging Trends in Mechanical Engineering, Thapar Institute of Engineering & Technology, Patiala (Punjab), India, 24-26, Feb., 2011,pg .94-96 Satish Kumar
26.      Design analysis of salisbury and banjo type axle housings International Conference on  Emerging Trends in Mechanical Engineering, Thapar Institute of Engineering & Technology, Patiala (Punjab), India, 24-26, Feb., 2011,pg .124-131 Tushar Chugh, Satish Kumar  
27.      Pressure drop evolution of pipe bend using CFD International Conference on Emerging Trends in Mechanical Engineering, Thapar Institute of Engineering & Technology, Patiala (Punjab), India, 24-26, Feb., 2011,pg .690-694 Manu Aggarwal,Prateek Srivastava, Satish Kumar
28.      Design of tussat thermal control system International Conference on Emerging Trends in Mechanical Engineering, Thapar Institute of Engineering & Technology, Patiala (Punjab), India, 24-26, Feb., 2011,pg .782-789. Sohil Batra, Satish Kumar  
29.      Energy saving in centrifugal pump with adjustable speed drive   International Conference on Emerging Trends in Mechanical Engineering, Thapar Institute of Engineering & Technology, Patiala (Punjab), India, 24-26, Feb., 2011,pg .907-910. Prateek Srivastava,Sasank Shekhar; Satish Kumar    
30.      Automation technology in energy management International Conference on Emerging Trends in Mechanical Engineering, Thapar Institute of Engineering & Technology, Patiala (Punjab), India, 24-26, Feb., 2011,pg .911-913. Harish Giri,Rakesh Joshi, Satish Kumar  
31.      Dimensionless characteristics of radial flow centrifugal pump using variable frequency drive Emerging Trends in Mechanical Engineering, Thapar Institute of Engineering & Technology, Patiala (Punjab), India, 24-26, Feb., 2011,pg .919-923.   Aseem Mishra,Rakesh Kumar; Satish Kumar    
32.      Formability and Surface Finish Studies in Single Point Incremental Forming Global Trends and Challenges in Design and Manufacturing, 3rd International and 24th All India Manufacturing Technology Design and Research Conference, Andhra University College of Engineering (A), Andhra University, Visakhapatnam – 530003, AP, India December 13-15, 2010. Volume 1, pp. 133 – 137. Samarjit Singh, A Bhattacharya, NV Reddy
33.      Grain Orientation during Single Point Incremental Forming 6th International Conference on Micro Manufacturing, Tokyo Denki University, Tokyo, Japan March 7 – 10, 2011 pp. 35 – 39 Anirban Bhattacharya, N V Reddy
34.      Formability and surface finish studies in Single Point Incremental Forming Proceedings of the 2011 International Manufacturing Science and Engineering Conference, Corvallis, Oregon, USA June 13 – 17, 2011, Paper code: MSEC2011-50284, pp. 1 – 7 A Bhattacharya, Samarjeet Singh, K Maneesh, N Venkata Reddy, Jian Cao
35.      A Study of Ductile and Brittle Fracture Behaviour of Bimetallic Welds at Cryogenic Temperatures for RPVs International Conference on science and engineering, Rohtak, 2011   Amit Sarda,  Rahul Chhibber, B.K. Dutta  
36.      Underwater welding International conference on emerging trends in mechanical engineering, 2011, Thapar Institute of Engineering & Technology, Patiala, PAGE 72 Aashish Kaushal, Rahul Chhibber
37.      Analysis of Creep in Functionally Graded Cylinder International Conference on Emerging Trends in Mechanical Engineering, Thapar Institute of Engineering & Technology, Patiala, Punjab, India, Feb 24-26, 2011, Page 301-306. Kishore Khanna, Harmandeep
38.      Creep deformation and Stress Analysis in Rotating Disc of Composite Material International Conference on Emerging Trends in Mechanical Engineering, Thapar Institute of Engineering & Technology, Patiala, Punjab, India, Feb 24-26, 2011, Page 306-312. Kishore Khanna, Devender Kumar, Barinder Singh
39.      Design and Analysis of Air flow Control Mechanism of Automotive HVAC module using CAE tools ‘International Engg. Symposium’ 2011, Kumamoto University, Kumamoto, Japan Daljeet Singh
40.      Epoxy Layered Silicates Nanocomposites as Matrix In Fibre-reinforced Composites. Advances in polymer science and rubber technology at IIT,KHARAGPUR. March 3-5,2011; Page 52 Sumit Mahajan, Bikramjit Sharma, Rahul Chibber, Rajeev Mehta
41.      An experimental study on effects of thermal cycling on cast aluminium composites reinforced with silicon carbide and fly ash particles International Conference on Emerging Trends in Mechanical Engineering at Thapar Institute of Engineering & Technology, PATIALA. Feb 24-26, 2011;Page 90 Sanjeev Kumar, Bikramjit Sharma, Dr.Rahul Chhibber  
42.      Minimum Transport Boudaries for Dense Phase Pneumatic Conveying of Powder            Bulk Solids India, Mumbai, April 2011- (organized by foreign agencies- Vogel and Numberg) S.S. Mallick, P.W. Wypych, R. Pan
43.      Design of Energy Efficient Pneumatic Transport System using Fluidised Dense-Phase Mode 16th ISME Conference on “Mechanical Engineering for SUSTAINABLE DEVELOPMENT”, IIT Delhi, December 2010 S. S. Mallick
44.      Analyzing signal to noise ratio optimization of physiological stress of Indian male workers in summer Institute of Ergonomics, Stoke Rochford, Lincolnshire,UK, pp 270-277, April 11-13, 2011 Ajay Batish, R.P. Singh;T P Singh
45.      Electric discharge machining of Al-10%Al2O3p as-cast composite 2nd International Conference on Production, Vol 1, 697-701, Dr. BR Ambedkar National Institute of Technology, Jalandhar, 2010 Ajay Batish, Sarabjeet Singh;Sanjeev Kumar
46.      Electric discharge machining of aluminum based metal matrix composite Global trends and Challenges in Design and manufacturing 3rd International and 24th All India manufacturing Technology, Design and Research (AIMTDR), Vishakhapatnam Vol 2, pp 1211-1216, 2010 Ajay Batish, Sarabjeet Singh;Sanjeev Kumar