1. |
Extraction of bio-diesel from waste cooking oils and their comparison, |
Proceedings of International Conference on Newest Drifts in Mechanical Engineering, ICNDME 2014, MMU Mullana, vol 1, pp 166- 174. |
Singh Sandeep, Sharma, S., Mohapatra, S. K., Kundu, K |
2. |
D-H Parameters Augmented with Dummy Frames for Serial Manipulators containing Spatial Links |
The 23rd IEEE International Symposium on Robot and Human Interactive Communication (RO-MAN 2014), pp. 975-980, August 25-29, 2014, Edinburg, Scotland, UK (2014). (DOI: 10.1109/ROMAN.2014.6926379) |
Amanpreet Singh, Ashish Singla and Sanjeev Soni |
3. |
On the Comparison of Creep in a Variable Thickness Rotating Functionally Graded Disc using Tresca and Von-Mises Criteria |
National Conference On Advances In Materials And Material Processing (AMMP-15), NIT Srinagar, May 22-23, 2015 |
Kishore Khanna, S.P.Nigam and V.K.Gupta |
4. |
Evaluation of tensile and flexural properties of hemp reinforced fresh/recycled polyethylene based natural fiber composites |
National Conference On Advances In Materials And Material Processing (AMMP-15), NIT Srinagar, May 22-23, 2015 |
Navrattan Goyal, Dharmpal Deepak, Kishore Khanna and V.K. Gupta |
5. |
Compensations for Tool Path to Enhance Accuracy during Double Sided Incremental Forming |
Proceedings of the ASME 2015 International Manufacturing Science and Engineering Conference MSEC 2015, June 8-12, 2015, Charlotte, North Carolina, USA, Paper ID MSEC2015-9404, pp. 1-8 |
R. Lingam, Anirban Bhattacharya, J Asghar, N V Reddy |
6. |
Application of hybrid fuzzy expert system to predict the quality of laser beam machined surface |
Processing and fabrication of Advanced materials XXIII, Organized by Mechanical Engineering Department, Indian Institute of Roorkee, Co-organized by Division of Materials Science and Engineering, University of Akron, Ohio, USA during December 5-7, 2014, pp. 405-416. |
Gaurav Sharma Vinod Kumar |
7. |
Physical Model Reduction of Antilock Braking System”. International Conference on Aeronautical |
Robotics and Manufacturing Engineering (ARME'2015), Bangkok, Thailand, June 2015; pp 80–86. |
Singh, M. and Bera, T. K. |
8. |
A Bond Graph Model for Object Grasping and Fingertip motion |
International Conference on Aeronautical, Robotics and Manufacturing Engineering (ARME'2015), Bangkok, Thailand, June 2015; pp 87–94. |
Arora, R. and Bera, T. K. |
9. |
Comparison for pull out strength of bone joint using conventional and ultrasonic drilled hole |
International Scientific Academy of Engineering & Technology,Pattaya (Thailand), June 17th -19th, 2015. |
Gurmeet singh, Vivek jain, Dheeraj Gupta |
10. |
An Investigation on Bone Drilling For Surface Topography |
International Scientific Academy of Engineering & Technology,Pattaya (Thailand), June 17th-19th, 2015. |
Gurmeet singh, Vivek jain, Dheeraj Gupta |
11. |
Superficial Enhancement Of Mild Steel Through Microwave Cladding |
5th International And 26th All India Manufacturing Technology, Design And Research Conference AIMTDR 2014, IIT Guwahati |
Arbind Prasad, Dheeraj Gupta, Mamilla Sankar |
12. |
Microstructural characterization of EWAC+20%WC102Ni microwave cladding on mild steel substrate |
23rd International Conference on Processing and Fabrication of Advanced Materials (PFAM 2014), December 5 to December 7, 2014, IIT Roorkee |
Dheeraj Gupta, Akshya Pathania |
13. |
A Study on the Micro Tool dressing using Ultrasonic vibration in-process grinding |
23rd International Conference on Processing and Fabrication of Advanced Materials (PFAM 2014), IIT Roorkee, Roorkee, December 5th-7th, 2014. |
Vivek Jain, Apurbba Kumar Sharma, and Pradeep Kumar |
14. |
Design, Fabrication and Simulation of Microchannel Network for MEMS |
COMSOL Conference, Bangalore, 2014. |
Vivek Jain, Apurbba Kumar Sharma, and Pradeep Kumar. |
15. |
A method for simplifying edge-torus tangency in drop-tilt method for 5axis machining of triangulated surfaces |
4th International Symposium on NC Machining (CNCM 2015, http://cncm2015.ust.hk/index.html), June 3-5, 2015 at Hong Kong University of Science and Technology, HK, China |
Ravinder Kumar Duvedi, Sanjeev Bedi and Stephan Mann |
16. |
Improved scale-up procedures for fluidized dense-phase pneumatic conveying systems |
The 8th International Conference for Conveying and Handling of Particulate Solids, Tel-Aviv, Israel, 3-7th May 2015 |
Setia, G. and Mallick, S.S |
17. |
Flow mechanism assessment of fine powders in horizontal pneumatic conveying by analyzing pressure fluctuations |
The 8th International Conference for Conveying and Handling of Particulate Solids, Tel-Aviv, Israel, 3-7th May 2015 |
Mittal, A. and Mallick, S.S |