|
Title
|
Author
|
Journal Details
|
Impact Factor
|
|
Graphitic open-celled carbon foams: processing and characterization
|
R. Mehta, D. Anderson and J. Hagger
|
Carbon, 41/11, 2174-2176, 2003.
|
[Impact Factor: 4.373]
|
|
Biochemical Pulping of Wheat Straw
|
P. Bajpai, S.P. Mishra. O.P. Mishra, S. Kumar, P.K. Bajpai and S. Singh
|
Tappi J. 3(8), 3-6 (2004)
|
[Impact Factor 0.675]
|
|
Biochemical Pulping of Bagasse
|
P. Bajpai, S.P. Mishra, O.P. Mishra, S. Kumar and P.K. Bajpai,
|
Biotechnol Progress 20(4), 1270-72 (2004)
|
[Impact Factor 1.682]
|
|
Effect of Processing on Zeta Potential and Cationic Demand of Kraft Pulps
|
N.K. Bhardwaj, S. Kumar and P.K. Bajpai
|
Colloids and Surfaces A: Physicochem. Eng. Aspects 246, 121-125 (2004)
|
[Impact Factor 1.962]
|
|
Thermal Performance Evaluation of Closed Air Circuit Aircooled (CACA) Heat Exchangers for High Rated Electrical Motors – A Case Study.
|
Gangacharyulu, D., Rajeev Kumar Sharma, Dora, K.B. & Anil Kumar
|
International Journal of Heat Exchangers, R. T. Edwards, Inc., 1524-5608/Vol V (2004), pp 221-238.
|
--
|
|
Photocatalytic degradation of 3,4-dichlorophenol using TiO2 catalyst in a shallow pond reactor
|
A.P. Toor, A. Verma, P.K. Bajpai, C.K. Jotshi and V. Singh
|
Ind. J. Chem. Technol. 12, 75-81 (2005).
|
[Impact Factor 0.43]
|
|
Effect of Zeta potential on retention and drainage of secondary fibre
|
N.K. Bhardwaj, S. Kumar and P.K. Bajpai
|
Colloids and Surfaces, A: Physicochemical and Engineering Aspects 260(1-3), 245-250 (2005).
|
. [Impact Factor 1.962]
|
|
Synthesis of poly(lactic acid): A review
|
R. Mehta, V. Kumar, H. Bhunia and S.N. Upadhyay
|
Journal of Macromolecular Science Polymer Reviews, 45(4), 325-349, 2005
|
[Impact Factor: 4.829]
|
|
Modeling and simulation of fluid catalytic cracking unit.
|
Gupta, R.K., Kumar, V., and Srivastava,V.K
|
Reviews in Chemical Engineering, 21(2), 95-131, 2005
|
[Impact Factor: 2.813]
|
|
Kinetics of Alkylation of Benzene with Isopropyl Alcohol Over Ce-exchanged NaX Zeolite
|
Barman, S.; Pradhan, N. C.; Basu, J. K
|
Ind. & Eng.Chem.Res. 2005, 44, 7313-7319
|
[Impact Factor: 1. 518]
|
|
Photocatalytic Degradation of Direct Yellow 12 Dye using UV/TiO2 in a Shallow Pond Slurry Reactor
|
A.P. Toor, A. Verma, C.K. Jotshi, P.K. Bajpai and V. Singh
|
Dyes and Pigments 68, 53-60 (2006)
|
[Impact Factor 2.769]
|
|
Enzymes improve ECF bleaching of pulp
|
P. Bajpai, A. Ananad, N. Sharma, S.P. Mishra, P.K. Bajpai and D. Lachenal
|
BioResources 1(1), 34-44 (2006).
|
[Impact Factor 4.815]
|
|
Use of enzymes for reduction in refining energy – laboratory and process scale studies
|
P.Bajpai, S.P. Mishra, O.P. Mishra, S. Kumar and P.K. Bajpai
|
Tappi J. 5(11), 25-32 (2006).
|
[Impact Factor 0.675]
|
|
Thermal Performance Evaluation of Heat Pipe Heat Exchangers under Natural Convection
|
Gangacharyulu, D., Vikas Kumar and Ram Gopal Tathgir
|
International Journal of Heat Exchangers, R. T. Edwards, Inc., Volume VII, No. 1, June, 2006, pp 103-122.
|
--
|
|
Alkylation of phenol with methanol over Ce exchanged 13X zeolite catalyst
|
Barman, S; Pradhan, N. C; Basu, J. K
|
Catal.Lett. 2006, 111(1-2),67-73.
|
[Impact Factor: 5.167]
|
|
Kinetics of reductive isopropylation of benzene with acetone over nano copper chromite loaded H-mordenite catalyst
|
Barman, S; Pradhan, N.C; Acharya A., Pramanik, P.
|
Ind.& Eng. Chem.Res. 2006, 45, 3481-3487
|
[Impact Factor: 1.c]
|
|
Treatment of bleaching effluent from the pulp and paper industry by photo-catalytic oxidation
|
A.P. Toor, V. Singh, C.K. Jotshi, P.K. Bajpai and A. Verma
|
Tappi J. 6(6), 9-13 (2007).
|
[Impact Factor 0.675]
|
|
Fiber loading of hardwood pulp by in-situ precipitation of aluminosilicate
|
V.S. Chauhan, S.P. Singh and P.K. Bajpai
|
BioResources 2(4), 560-571 (2007).
|
[Impact Factor 4.815]
|
|
Modelling for exit gas composition of a 10 MW AFBC power plant using rice husk particles
|
Ravi Inder Singh, Mohaptra, S. K. and Gangacharyulu, D.
|
International Journal of Applied Engineering Research, Volume 2, Number 2, June 2007, pp. 241-260
|
[Impact Factor 1.232]
|
|
Three Phase Mathematical Modeling of Catalytic Fluidized Bed Reactors using Bubble Growth along Bed Height
|
Ravi Inder Singh, Mohaptra, S. K. and Gangacharyulu, D
|
International Journal of Applied Engineering Research, Volume 2, Number 2, June 2007, pp. 261-278.
|
[Impact Factor 1.232]
|
|
Heat Transfer Studies of Heat Pipe’, Journal of Heat Transfer Engineering,
|
Vikas Kumar, Gangacharyulu, D. and Ram Gopal Tathgir
|
Journal of Heat Transfer Engineering, Volume 28, Issue 11, November 2007, pp 954 – 965.
|
[Impact Factor 0.792]
|
|
Some Experimental Studies on Heat Transfer Characteristics of an Axially Grooved Heat Pipe under Forced Convection Conditions – A Case Study
|
Gangacharyulu, D., Rajesh Kumar Chug and Tathgir, R.G
|
Journal of Institution of Engineers (India), Submitted for publication on December 28, 2007 after first revision
|
--
|
|
Mathematical modeling of the poly(lactic acid) ring-opening polymerisation kinetics
|
R. Mehta, V. Kumar, S.N. Upadhyay
|
Polymer-Plastic Technology & Engineering, 46(3), 257-264, 2007.
|
[Impact Factor: 0.456]
|
|
Mathematical modeling of the poly(lactic acid) ring-opening polymerisation using Stannous Octoate as a Catalyst
|
R. Mehta, V. Kumar, S.N. Upadhyay
|
Polymer-Plastic Technology & Engineering, 46(10), 933-937, 2007
|
[Impact Factor: 0.456]
|
|
A new generic approach for the modeling of fluid catalytic cracking (FCC) riser reactor
|
Gupta, R.K., Kumar, V., and Srivastava, V.K
|
Chemical Engineering Science, 62, 4510-4528, 2007
|
[Impact Factor: 1.884]
|
|
Fluid Catalytic Cracking Riser Modeling in Heat Transfer Mode
|
Gupta, R.K. and Vineet Kumar
|
Chemical Products and Process Modeling, Vol 3, Issue 1, article 11, 2008
|
[Impact Factor: 1.815]
|
|
Hygrothermal degradation of the composite laminates from Woven Carbon/SC-15 epoxy resin and Woven Glass/SC-15 epoxy resin
|
R. N. Jana and H. Bhunia
|
Polymer composites, 29, 664-669, 2008.
|
[Impact Factor: 0.746]
|
|
Thermal stability and proton conductivity of silane based nanostructured composite membranes
|
R. N. Jana and H Bhunia
|
Solid state Ion, 178, 1872-1878 2008.
|
[Impact Factor: 2.425]
|
|
Statistical Optimization of Process Parameters for Cr (VI) Biosorption onto Mixed Cultures of Pseudomonas aeruginosa and Bacillus subtilis
|
K. Tarangini, Arvind Kumar, G.R. Satpathy and Vikas Kumar Sangal
|
Journal of Clean – Soil, Air and Water”, Wiley Interscience, 37 (4 – 5), 319 – 327, 2009
|
[Impact Factor: 1.0]
|
|
Second-order Numerator Dynamics Systems: Effects of Initial Discontinuities, Theoretical Foundations of Chemical Engineering
|
S. Ahuja
|
Springer (paper accepted for publication)
|
[Impact Factor: 0.28]
|
|
Effect of Multiwalled Carbon Nanotubes on Crystallization Behavior of Poly(e-caprolactone)diol
|
R. N. Jana, C. Im and H Bhunia
|
Journal of Thermoplastic Composite Materials (doi:10.1177/0892705709105978) 2009
|
[Impact Factor: 0.466]
|
|
Characterization of chlorinated organic material in Eucalyptus pulp bleaching effluents
|
M Roy, SK Chakrabarti, NK Bharadwaj, S Chandra, S. Kumar, S. Singh and PK Bajpai
|
J. Sci. Ind. Resch. 63 (June), 527-535 (2004).
|
[Impact Factor 0.176]
|
|
An Experimental Performance Evaluation of Vortex Tube
|
Preet Kawal, S., Tathgir, R.G., Gangacharyulu, D., and Grewal, G.S
|
Journal of Institution of Engineers (India), Volume 84, January 2004, pp 149-153.
|
--
|
|
Improving Digester Performance through the use of Surfactants and AQ
|
P. Bajpai, S. Kumar, S.P. Mishra, O.P. Mishra and P.K. Bajpai
|
IPPTA Convention Issue, 43-53 (2005).
|
--
|
|
Study on improving the opacity of paper using adjunct filler pigments
|
P. Chowdhury, P. Gupta, M. Kumar, P.K. Bajpai and R. Varadhan
|
IPPTA J. 17(3), 57-62 (2005).
|
--
|
|
Alkylation of benzene with ethyl alcohol over Ce exchanged 13X zeolite catalyst
|
Barman, S; Pradhan, N. C; Basu, J. K
|
Indian Chemical Engineer. 2006, 48(1), 10-17.
|
[Impact Factor: 0.613]
|
|
Application of per-acetic acid in chemical pulp bleaching
|
S. Tripathi, S.P. Mishra, O.P. Mishra, P. Bajpai, S. Kumar, P.K. Bajpai and R Varadhan
|
IPPTA J. 19(1), 77-82 (2007).
|
--
|
|
Hot chlorine dioxide versus conventional DO stage in ECF bleaching of kraft pulps
|
S. Kumar, S.P. Mishra, O.P. Mishra, P. Bajpai, S. Tripathi, P.K. Bajpai and R Varadhan
|
IPPTA J. 19(1), 87-91 (2007).
|
--
|
|
Lumen loading of bleached pulps by in-situ precipitation of filler
|
V.S. Chauhan, S.P. Singh and P.K. Bajpai,
|
IPPTA J. 19(3), 139-143 (2007).
|
--
|
|
Optimization of ASA emulsion and impact of filler on ASA sizing
|
P.K. Bajpai, A. Sharma, S. Das and R. Varadhan
|
IPPTA J. 20(3), 99-104 (2008).
|
--
|
|
Enzymatic refining of chemical pulp
|
S. Tripathi, N. Sharma, O.P. Mishra, P. Bajpai and P.K. Bajpai,
|
IPPTA J. 20(3), 129-132 (2008).
|
--
|
