Name: S.P. NIGAM

Designation: Visiting Professor

Contact Address: Mech. Engg. Dept., Thapar University, Patiala

Email: spnigam@thapar.edu, ratan1512@yahoo.co.in

Telephone No: 0175-2393087 (Off ), 0175-2393721(Res)

Fax No: 0175-2364498

Area of Specialization & Research Interest: Machine Design, Vibrations & Noise

Education Qualifications (Starting with highest degree):

Sr. No	Degree	Specialisation	Year of passing	Institute	University	Topic of Project /Thesis
1.	Ph.D.	Mech. Engg.	1976	University of Roorkee	University of Roorkee	Modal loss factor for rectangular plates
2.	M. Tech	Mechanisms and Vibrations	1967	IIT Kharagpur	IIT Kharagpur	Material damping of beams
3.	M.E.	I.C. Engines	1964	Govt Engg College, Jabalpur	Jabalpur University	Turbo- charger design
4.	B.E. (Hons.)	Mech. Engg.	1961	Govt Engg College, Jabalpur	Jabalpur University	Mechanical Engg.
5.	B.Sc.	Phy, Chem, Maths	1958	Allahabad University	Allahabad University	Phy,Chem, Maths

Experience (Teaching, Industry) (Starting with the latest)

Sr. No.	Position Held	Duration		Organisation	Subjects taught/ Work area in Industry
		From	To
1.	Visiting Professor	21.06.2006	Till date	Thapar University, Patiala	Mech. Vibrations, Dynamics & Kinematics of m/c
2.	AICTE Emeritus Fellow	01.07.2004	15.06.2006	IIT Roorkee	Mechanisms Vibrations, Measurements & Automatic Controls, Noise
3.	Professor in Mech. Engg	22.09.1987	30.06.2004	Univ of Roorkee/ IIT Roorkee	Mechanisms Vibrations, Measurements & Automatic Controls, Noise
4.	Reader in Mechanical Engg.,	06.01.1984	21.09.1987	Univ of Roorkee	Mechanisms Vibrations, Measurements & Automatic Controls, Noise, Machine Design
5.	Professor in Mech. Engg	15.06.1982	03.01.1984	Aden University, Aden	Theory of m/c and Vibrations
6.	Asstt. Prof. in Mech. Engg	21.10.1981	14.06.1982	Aden University, Aden	Automatic controls, Theory of m/c and Vibrations
7.	Reader in Mechanical Engg	04.05.1979	19.10.1981	Univ of Roorkee	Machine Design Automatic Controls, Kinematics
8.	Reader in Mechanical Engg	20.01.1971	30.04.1979	Govt. Engg. College, Jabalpur	Vibrations, Theory of m/c, Machine design
9.	Lecturer in Mechanical Engg	10.10.1961	19.01.1971	Govt. Engg. College, Jabalpur/Govt. Polytechnic,Jabalpur	Mechanical Engg subjects

Administrative Responsibilities:

· Chief Warden 1986 & 1987

· Associate Dean (Research & Industrial Liaison) 1989 to 1992

· Member, Roorkee Entrance Examination (REE) 1993 & 1994

· Chairman, Roorkee Entrance Examination (REE) 1998 & 2000

· Dean, Academic Programmes 2000

· Advisor, Roorkee Entrance Examination (REE) 2001

· Coordinator DRDO-SET Examination 2002 and 2003

· Head, Mech. & Ind. Engg. Deptt. April 2002 to Dec. 2003

· Advisor, All India MCA Entrance Test 2004

Publications:

Journal International:

Sr No	Authors name	Title of paper	Name and number of Journal	Page and year of publication
1.	S.P. Nigam, G.K. Grover S. Lal	‘Loss Factor for a Simply Supported Rectangular Plate of Variable Thickness’	Jr. of American Institute of Aeronautics and Astronautics, V.13, No.9,	pp1228-1230 Sept. 1975.
2.	S.P. Nigam, G.K. Grover S. Lal	‘Loss Factor for a Rectangular Plate of Parabolic Thickness Variation’	Jr. of Engg. for Ind., ASME Ser. b., V.99. n.3	pp799-801 August 1977.
3.	S.P. Nigam, G.K. Grover S. Lal	‘Sound Radiation from a Simply Supported Rectangular Plate, Vibrating under Complex Modes’	Israel Jr. of Tech., V.15,	pp 123-129, 1977
4.	S.P. Nigam M Malik	‘A Study on a Vibratory Model of a Human Body’,	Jr. of Biomedical Engg., Trans. ASME, USA, V.109, No.2	pp 148-153 May 1987.
5.	S.P. Nigam	‘Fatigue Behaviour of Welded Tubular Joints’	Yemen Engineer, Aden/PDRY, V.2, No.1	1988
6.	MMA Kader, S.P. Nigam, G.K. Grover	‘A Study on Mode of Failures in Spur Gears under Optimized Conditions’	Jr. of Mechanism and Machine Theory, Pergaman, Gt. Britain V.33, No.6,	pp 839-850, 1998.
7.	MMA Kader, S.P. Nigam, G.K. Grover	A Nomograph Approach to Optimized Design of a Compact Spur Gear Set	SAE Inc. 1999-01-1717	pp 515-523 1999
8.	R. Arora S.P. Nigam	“A Comparative Study of various methods to detect isomorphism in kinematics chains”	Journal of Mechanism and Machines Theory USA (under revision)	-

Journal National:

Sr No	Authors name	Title of paper	Name and number of Journal	Page and year of publication
1.	B.M. Belgaumkar S.P. Nigam	‘Study of Damping in Aluminium, Brass and Cast Iron Cantilever Beams’	Jr. of Science and Engg. Res V.12, Pt.2,	pp 293-298 1968.
2.	S.P. Nigam G.K. Grover	‘Some Factual Cases in Support of Noise Legislation,’	Presented at the Symp, in NPL, Delhi, March 1973, Published in Jr. of Acous. Soc. Of India, V.II, n.1,	Jan. 1974.
3.	S.P. Nigam V.K. Jain G.K. Grover	‘A Study of Vehicle Noise Problems and its Control’,	The Automobile Engr., Jr. of the Inst. Auto Engrs India	pp 7-12 Dec. 1974.
4.	V.K. Jain S.P. Nigam	‘Noise and Vibration in Industry’	The Indian and Eastern Engr.,	pp 231-235, May 1975.
5.	V.K. Jain S.P. Nigam	‘Rolling Element Bearing Noise’	The Indian and Eastern Engr	pp.565-566, Dec. 1975
6.	S.P. Nigam	‘Noise Pollution’	The Indian and Eastern Engr V. 119, No.3	pp 123-125 March, 1977.
7.	B.B. Singh U.B. Chitranshi S.P Nigam	‘Noise Pollution in Sugar Industry - A Case Study: Pt.I’	Indian Jr. of Environment Health, NEERI, Nagpur, V.28, No.1	pp 21-33 Jan. 1986.
8.	A.K. Gupta S.P. Nigam J.S. Hansi	‘A Study on Traffic Noise for Various Landuses for Mixed Traffic Flow’	Indian Highways (Annual Number); V.14, No.2	pp 30-48 Feb. 1986
9.	B.B. Singh U.B. Chitranshi S.P Nigam	‘Noise Pollution in Sugar Industry - A Case Study: Pt. II’	Indian Jr. of Environment Health, NEERI, Nagpur, V.29, No.29	pp 147-159 Apr. 1986.
10.	N. Singh S.P. Nigam G.K. Grover	‘Study of Vibratory Response Characteristics of Human Body through Analytical Modelling’	Jr. of the Instn. of Engrs. (India), V.72, PTID 1	pp 12-17. June 1991,
11.	MMA. Kader S.P. Nigam G.K. Grover	‘Design Space as a Tool for Obtaining Compact Gear Set’	Jr. of Instn. of Engrs., V73,	pp 195-198, Sept. 1992.
12	S.S. Saleem S.P. Nigam	‘Regression Analysis for Selection of a Descriptor to Accurately Predict Noise on Indian Highways’	Indian Jr. of Metallurgy and Mat. Sc., V.45, No. 3	pp 127-135. July-Sept. 2003,
13	M.K. Gupta S.P. Nigam	‘Loss Factor for a Clamped Edge Circular Plate Subjected to an Eccentric Loading’	Indian Journal of Engineering & Materials Science, New Delhi, V 11	pp 79-84, April 2004,
14	S.S. Saleem S.P. Nigam	‘Noise Prediction Model for Indian Traffic Condition using L10 Approach’	Journal of Metallurgy & Materials science, National Metallurgical Lab, Jamshedpur v47,no.2	pp91-101 April-June 2005
15	S.P. Nigam	‘A Study on Traffic Noise Standards of different countries and critical assessment of these with respect to Indian Traffic Condition.	Communicated to Indian Journal of Transport Management, CIRT, Pune.	-
16	S.P. Nigam	Measurement of Highway Traffic Noise and Design of Acoustic Barrier for its Control”	Communicated to Journal of Metallurgy & Materials science, National Metallurgical Lab, Jamshedpur.	-

Conference International:

Sr No	Authors name	Title of paper	Name of Conference	Page and year of proceedings
1.	S P Nigam	‘Noise Pollution in Sugar Industry – Effects on Industrial Workers’	Accepted for presentation at the Conference on ‘Achieving Better Acoustic Environment’ Singapore,	August, 1985
2.	S P Nigam M.Malik	‘Human Body Vibratory Modelling via Anthropomorphic Models’	Presented at the 12^th Annual Modelling and Simulation Conf., University of Pittsburgh, Pennsylvania, USA,	4-5 May 1989.
3.	SP Nigam G K Grover MMA Kader	‘A Nomograph Approach to Optimized Design of a Compact Spur Gear Set’,	Presented at 1999 SAE Noise & Vibration Conference & Exposition, Traverse City, Michigan, U.S.A.,	May 17-20, 1999.
4.	S P Nigam	‘Noise Control-Concept and Strategies’	Invited Lecture published in the Proceedings of First International Conference on Mechanical Engineering, University of Aden, Yemen	Nov. 2002.

Conference National:

Sr No	Authors name	Title of paper	Name of Conference	Page and year of proceedings
1.	S.P. Nigam	‘Gear Noise’	presented at the Symp. On Gear Design, I.I.T. Kharagpur	Dec. 1966
2.	S.P. Nigam G.K. Grover	Some Factual Cases in Support of Noise Legislation	Presented at the Symp, in NPL, Delhi	March 1973
3.	S.P. Nigam G.K. Grover	Evaluation of Fundamental Mode Loss Factor for a Rectangular Plate’	19^th ISTAM Conf., Kharagpur	Dec. 1974.
4.	S.P. Nigam	General Concepts of Noise Control’	Presented at the Ann. Tech. Sess., M.P. Center Inst. of Engr., India	Dec. 1975
5.	S.P. Nigam CKC Jaini	Causes and Control of Noise in Gears’	Presented at the Ann. Tech. Sess., M.P. Centre, Inst. of Engr. India	Dec. 1975.
6.	CKC Jaini S.P. Nigam	Gas Lubrication’	Presented at the Ann. Tech. Sess., M.P. Centre, Inst. of Engr. India	Dec. 1975
7.	S.P. Nigam	Noise Pollution – A Future Problem’	Presented at the Engr. Day Sem. Inst. of Engrs. India, M.P. Centre,	Sept. 1976
8.	S.P. Nigam G.K. Grover	Internal Damping for Rectangular Plates – Complex Resonance Conditions’	3^rd ISME Conf. IIT, New Delhi	Feb. 1980
9.	S.P. Nigam	Noise Control – Some General Considerations’	Presented at the Regional Seminar on Vibration and Noise Control. The Institution of Engineers, Rajasthan Centre, Jaipur	Sept. 1980
10.	S.P. Nigam N Malik	Mechanical Analogue of a Human Body’	4^th ISME Conference’, University of Roorkee	Oct. 1981
11.	S.P. Nigam	‘Industrial Noise Control - Some Examples’	Presented at the National Seminar on Environment Pollution Control Management, BHEL, Hardwar,	Sept. 1985
12.	S.P. Nigam	‘Fault Detection – A Diagnostic Application to Gears	Presented and Published in the Proc. Of Workshop in Trends in Mech. Engg., Education & Research, IIT Kharagpur	Dec. 22-23, 1989.
13.	S.P. Nigam	‘Anthropomorphic Vibratory Models of a Standing Human Being’	Presented and published in the 4^th National Conf. On Machines and Mechanism, University of Roorkee	16-17, March 1990
14.	S.P. Nigam	‘Industrial Noise and Its Control’	Invited Lecture at National Symposium on Acoustics-91, NPL, New Delhi,	Oct. 30, 31 & Nov. 1, 1991
15.	R.K. Awasthi A Bhardwaj S.P. Nigam	Human Body Vibratory Model under Sitting Posture’	Proc., IX ISME Conf., Roorkee	Nov. 10-11, Sept. 1992
16.	S.P. Nigam	‘Design for an Acoustic Barrier for Highway Noise Control’	Indo-US Symposium on Emerging Trends in Vibration & Noise Engg., IIT Delhi	18-20 March, 1996, p. 151-190.
17.	S.P. Nigam	‘Vibration Modelling and Analysis of Human Body in Sitting Postures Including Damping Considerations	Proc. of ISME Conf., Delhi College of Engg	pp IV-131-138. 1996,
18.	S.P. Nigam	‘A Study on Material Damping of Rectangular Thin Plate Under Uniformly Distributed Load’	Proc. Int. Conf. On Advances in Mech. & Indl. Engg., University of Roorkee, Roorkee,	Feb. 6-8, 1997
19.	Chandradharappa S.P. Nigam	‘Studies on Transportation Noise at Agra Fort’	National conference on Urban Transport and the Environment, Belgaum	June 5-7, 2003, pp 329-338.
20.	S.P. Nigam	“Noise Control- Concepts and Strategies”	Proceedings of 2^nd NCME Conference, Thapar University Patiala	10-11 November 2006, pp. 1-18.
21.	S.P. Nigam	Machinery Noise and its Control	Invited lecture at 2^nd National Conference MECHEX on Advancement in Mech. Engg., GG Institute of Technology & Science, Jabalpur	12-13 March 2007
22.	S.P. Nigam	Vehicular Traffic Noise and its Characterization	Proceedings of 3^rd NCME Conference, Thapar University, Patiala	14-15 November, 2008, pp. 1-9.
23.	S. C. Zanwar Mayank Mishra S.P. Nigam	A Study on Damping Coefficients of A Vibratory Model of Human Body	Proceedings of 3^rd NCME Conference, Thapar University, Patiala	14-15 November, 2008, pp. 225-238.

Professional Advice / Consultancy:

Sr. No.	Title	Value (Rupees in lacs)	Organisation	Duration
1.	Colloquium and Research Expositions on Vibration & Noise	2.00	Pollution Control Research Institute, B.H.E.L, Hardwar	1984.
2.	Monitoring of Environmental Parameters – Sound Level Measurements	0.75	Pyrites, Phosphates and Chemical Ltd., Maldeota, Dehradun	1986.
3.	Tyre Noise Investigation	1.00	Modi Rubber Ltd., Modipuram	1987.
4.	Investigation of Noise Control Problem of a Vikram 3 Wheeler Vehicle	1.20	Scooter India Ltd., Lucknow	1988.
5.	Noise Pollution Studies in Agra: Testing and Control Measures	4.20	Agra Development Authority, Agra	1989.
6.	Noise Pollution Studies in Agra: Analysis and Modeling	4.20	Agra Development Authority, Agra	1989
7.	Vibration Problem of Pump Set, IFFCO Panipat	0.50	Mather & Platt (India) Ltd., Chinchwad, Pune	1990
8.	Noise Reduction of Offices/Barracks Opposite Diesel Generating Station	2.50	Modipon Fibres Ltd., Modinagar	1992.
9.	Noise Study in Sugar Factory, Doiwala	0.75	U.P. State Sugar Corp. Ltd., Unit, Doiwala, Dehradun	1993
10.	Vibration Studies at Sites for Installation of Holographic Machine	0.50	Modi Rubber Ltd., Modipuram	1993
11.	Environmental Impact Assessment on Noise in Bongaigaon Refinery and Petro Chemicals Ltd.,	6.50	Bongaigaon Refinery and Petro, Chemicals Ltd., (BRPL), Assam	1994
12.	Aircraft Noise Monitoring Around Indira Gandhi International Airport, Delhi	10.5	Central Pollution Control Board, New Delhi	2002

Research / Project Supervision

Ph.D.

Sr. No.	Title	Year of completion
1.	“A Non-linear Optimization Technique for the Design of a Compact Spur Gear Set” –	1996.

ME/M Tech.

Sr. No.	Title	Year of completion
1.	A Study on the I.C. Engine Noise	1971
2.	Noise Pollution Studies in a Sugar Factory	1984
3.	A Study of Vibratory Response Characteristics of Human Body through Analytical Modelling	1986
4.	Performance Evaluation of a Cavity Type Silencer, with Perforated Bridge Using a Cold Flow Test Rig.	1986
5.	Study of Impact Noise in an Engineering Industry	1987
6.	Free Vibrations of Bi-modulus Composite Plates	1988
7.	Development of Human Body Vibratory Models through Anthropomorphic Segments	1988
8.	Study of Material Damping in Circular Plates of Uniform Thickness	1990
9.	Studies on Transportation Noise Around National Monuments in Agra	1991
10.	Optimised Design of a Compact Gear Set	1991
11.	Study of Vibratory Model of Human Body under Various Sitting Postures	1992
12.	Evaluation of Material Damping of Rectangular and Circular Plates of Variable Thickness under Different Boundary Conditions	1992
13.	Vibration Modelling and Analysis of Human Body in Sitting Postures including Damping Considerations	1992
14.	Effect of Traffic Noise on a Exposed Group of Population – A Case Study	1993
15.	Effect of Internal Loss Factor of Plates under Harmonic and Non-Harmonic Excitation	1993
16.	Study of Response of Human Body under Different Excitation Condition through Analytical Modelling	1993
17.	Modal Analysis of a Human Body Analogue under Different Excitation Conditions	1993
18.	Computer Aided Seismic Design Analysis for a Centrifugal Pump	1995
19.	Design Space Approach for Obtaining an Optimized Gear pair	1996
20.	A Study of Design Space Approach for Designing an Optimized Helical Gear Pair for different Gear Materials	1997
21.	A Study on Kinematic Analysis for Designing and Design of Multiple Input Small Crank Mechanism for Function Generation	1997
22.	A Study on an Optimized Design of a Helical Gear Pair	1998
23.	Kinematic Analysis and Design of 3-Input, 8-Bar Small Crank Mechanism for Function Generation	1998
24.	Evaluation of Equivalent Viscous Damping Coefficients for a Vibration Model of a Human Body	1999
25.	A Study on Resonant Modal Damping of Rectangular Plate of Non-Uniform Thickness Under Harmonic and Non-Harmonic Loading	1999
26.	A Study on Damping Response of a Human Body Vibrating Model under Sitting Posture	2000
27.	A Study on Optimization of Non-Standard Helical Gear Set for Different Materials	2000
28.	To Study the Variation of Static Performance Parameters for Higher order Four Bar, Path, Function & Motion Generation Tasks	2001
29.	Development of a Software for Plotting of Noise Contour inside the IGI Airport	2001
30.	Dynamic Analysis of Robotic Arm for second mode of Vibration	2002
31.	Development of a Noise Prediction Model for Indian Traffic Conditions on a National Highway	2002
32.	FEM Modelling of a Smart Beam	2003
33.	Experimental Investigation on Tire Noise	2003
34.	Identification of Isomorphism and Structural Properties of Kinematic Chains with the help of Adjacency Matrices	2004
35.	Experimental Investigations of Tire Noise of Two and Three Wheeled Vehicles	2004
36.	Condition Monitoring and Fault Diagnosis of Rotating Machinery of a Thermal Power Plant using Model-Based order Tracking System.	2005
37.	Measurement of highway traffic noise and design of an acoustic barrier for its control.	2006
38.	Optimization of the static performance parameter of a four bar chain for function generation with greater number of accuracy points.	2006
39.	A study of traffic noise model and development of nomographs for traffic noise prediction.	2006
40.	A study on optimized design of a spur gear reduction unit.	2007
41.	A study of human body vibration model and its response to two forces.	2007
42.	Kinematic synthesis of a four bar linkage for function generation and its optimization with respect to static performance parameters.	2007
43.	Evaluation of damping coefficients of a vibratory model of human body.	2008
44.	A study on optimized design of non standard helical gear reduction unit	2008
45.	A comparative study of various methods for identification of isomorphism in kinematic chains	2008
46.	Noise testing and Analysis of two wheelers	2009
47.	Study and Analysis of generator noise and its control	2009

BE

Guided Forty Undergraduate Projects on Machine Design; Vibration and Noise

Seminar / Symposia / Conferences:

Organised

Sr. No.	Title	Place	Dates
	4^th ISME National Conference on Mechanical Engineering	University of Roorkee, Roorkee	1981
	National Conference on Machines & Mechanisms-90	University of Roorkee, Roorkee	1990

Participated

1. Symposium on Gear Design, IIT, Kharagpur, Dec. 1966.

2. Symposium on Noise, NPL, Delhi, March 1973.

3. 19^th ISTAM Conf., IIT, Kharagpur, Dec. 1974.

4. Annul Tech. Session, M.P. Centre, Instn of Engrs., Jabalpur, Dec. 1975.

5. Third ISME Conference, IIT, Delhi 1980.

6. Regional Seminar on ‘Vibration and Pollution’, Jaipur, 1980.

7. Fourth I.S.M.E. Conference University of Roorkee, Roorkee, Oct. 1981.

8. CAD/CAM Workshop’ arranged by HCL, Delhi, 1984.

9. B&K Seminar on “Measurement and Noise”, Delhi, April 1985.

10. National Seminar on ‘Environment Pollution Control Management’, PCRI, BHEL, Hardwar, Sept. 1985.

11. Panelist in the Panel Discussion on “Industrial Pollution and Urban Development”, Institution of Engineers Roorkee Centre, World Environment Day June 1985.

12. Seminar on ‘Vibration Analysis and Modal Analysis’ arranged by M/S Bruel & Kjaer, Denmark at Delhi, 1987.

13. Annual Modelling and Simulation Conference, Univ. of Pittsburgh U.S.A., May, 1989.

14. National Workshop on ‘Trends in Mechanical Engineering Education and Research’ I.I.T., Kharagpur, Dec. 1989.

15. National Conf. On Machine and Mechanism at University of Roorkee, Roorkee, March 1990.

16. National Symp. On Acoustics, NPL, New Delhi, Oct.-Nov. 91.

17. Ninth ISME Conf., UOR, Roorkee, Nov. ’94.

18. INDO-US Symposium on Emerging Trends in Vibration and Noise Engineering, IIT, Delhi, March, 96.

19. International Conference on ‘Advances in Mech. & Indl. Engineering, UOR, Roorkee, Feb. ’97.

20. 1999 SAE Noise & Vibration Conference & Exposition, Traverse City, Michigan, USA, 17-20, May 1999.

21. 13^th ISME Conference held at I.I.T., Roorkee, December 30-31, 2003.

22. 2^nd National Conference on ‘Recent Development in Mechanical Engineering’ held at Thapar University Patiala, 10-11 Nov. 2006

23. 2^nd National Conference MECHEX on Advancement in Mechanical Engineering held at GG Institute of Technology and Science, Jabalpur, 12-13 March, 2007

24. 3^rd National Conference on ‘Recent Development in Mechanical Engineering’ held at Thapar University Patiala, 14-15 Nov., 2008

Short Term Course / Summer, Winter Schools / Continuing Education Programmes:

Organised & Participated

Sr. No.	Title	Place	Dates
	Measurement and Control of Vibration and Noise in Industry	University of Roorkee, Roorkee	1980.
	Machinery Vibration & its Control	University of Roorkee, Roorkee	May 1988
	Noise Pollution in Industry and its Abatement	Institution of Engineers, Roorkee	Aug, 1988
	Industrial Noise Pollution and its Control	Institution of Engineers, Roorkee	Dec. 1989
	Environmental Noise Pollution and its Control	Institution of Engineers, Roorkee	Sept. 1992
	Noise Pollution –Monitoring and Control	Sponsored by Central Pollution Control Board, at University of Roorkee	Oct. 1998.
	Vibration Analysis - Development of Diagnostic Tools and Techniques	Sponsored by Ministry of Railways, IIT Roorkee	May 16-21, 2005
	Noise- An Awareness Programme	Thapar University Patiala,	27 March 2007
	Machinery Vibration and Its Control	Thapar University Patiala	14 -15 March 2008
	Industrial Noise and its Control	Thapar University Patiala	19-20 November 2008

Expert Lectures Delivered:

(i) Delivered around twenty Expert Lectures on Machine Design; Vibration; Noise and Noise Control in various Summer Schools, Short Term Courses, Symposia and Workshops at different places like Technical Teachers Training Institute, Bhopal; University of Roorkee, Roorkee; IIT Delhi, Modipuram Tyre Factory, BHEL Haridwar, NPL Delhi.

(ii) Conducted a Colloquium and Research Exposition on Vibration and Noise for the Engineers of BHEL, Hardwar in May, 1986.

Membership of Professional Bodies:

Sr. No.	Name of Professional Body	Type of Membership
	Institution of Engineers(India)	Fellow (Life Member)

Awards / Achievements:

Sr. No.	Title	Year	Agency
1	A N Khosla Prize	1973	University of Roorkee
2	Merit Scholarship	1959-1961	MP Government
3	Gold Medal in ME	1964	Jabalpur University

Technical Reports/Books/Course Materials/Monographs:

Sr. No.	Title	Year	Publisher
1	A workbook in Engineering Drawing	1972	Curriculum development Centre,TTTI,Bhopal
2	Theory of Machines –I*	2007	Distance Education Deptt,TU
3	Theory of Machines –II*	2008	Distance Education Deptt,TU
4	Mechanical Vibrations*	2009	Distance Education Deptt,TU
5	Mechanical Vibrations	2009	Nemchand Bros,Roorkee

* Reviewed